Lighting

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. - Low cost, high powered light - Highly visible in traffic = keeps you safe - 3 light settings – High, Low and flash - Tough durable design - Lumen Output: 250 - Run Time: 12:30 – 28:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

Blinder 1300 Front: A powerful front light with multiple mounting options, long lasting battery life and a compact & lightweight form. - Produces a powerful 1300 lumen road focused beam - Provides quality illumination up to 120m - Industry leading battery tech provides 1.5 hrs runtime on full brightness - Up to 120 hours runtime on Eco flash mode - Includes two mounts; a go-pro style attachment for mounting under a computer and a tough rubber strap for the handlebar. - Pre-programmed with 6 light modes to suit all conditions - USB-C rechargeable (cable not supplied) - 100% waterproof with an IP67 rating - Intelligent button LEDs show battery level & charge status - Side illumination windows for improved visibility Blinder R-150 Rear: Blinder R-150 is designed for cyclists that are looking for serious long-distance visibility. - Super bright 150 lumen output - A lightweight 48 grams - 9 eye-catching modes - 100% waterproof with IP67 rating - Side illumination via lens geometry - USB rechargeable battery - Integrated USB-A connector (cable-free) - Up to 50 hr runtime - Compatible with standard & aero seat posts - Low battery & charge indicator

Blinder 600 is the perfect choice for urban cyclists who take their rides and their safety seriously. Combining robust CNC construction, compact design, perfect beam angles and powerful light output, Blinder 600 front bike light raises the bar by which front bike lights are measured. A powerful front light with multiple mounting options, long lasting battery life and a compact & lightweight form. - Produces a powerful 600 lumen road focused beam - Provides quality illumination up to 80m - Industry leading battery tech provides 2 hrs runtime on full brightness - Up to 120 hours runtime on Eco flash mode - Includes a tough and durable mount for over or under bar mounting - Pre-programmed with 6 light modes to suit all conditions - USB-C rechargeable (cable not supplied) - 100% waterproof with an IP67 rating - Intelligent button LEDs show battery level & charge status - Side illumination windows for improved visibility

This brilliantly designed light set is bright, dependable and the perfect partner for commuters on urban streets. With more than enough power to be seen night and day, long runtimes and easy on / off mounting, this combo will greatly improve your safety while being a delight to use. Blinder 600 Front: Combining robust CNC construction, compact design, perfect beam angles and powerful light output, Blinder 600 is a top-shelf front bike light. - Produces a powerful 600 lumen road focused beam - Provides quality illumination up to 80m - Industry leading battery tech provides 2 hrs runtime on full brightness - Up to 120 hours runtime on Eco flash mode - Includes a tough and durable mount for over or under bar mounting - Pre-programmed with 6 light modes to suit all conditions - USB-C rechargeable (cable not supplied) - 100% waterproof with an IP67 rating - Intelligent button LEDs show battery level & charge status - Side illumination windows for improved visibility Plus Rear: Plus rear is simply a pleasure to use; versatile mounting options, magnetic attachment and the ability to remove from the mount and clip it onto just about anything. - Be seen from up to 450 meters away - Integrated USB-A connector for cable free charging - Waterproof with IP66 rating - Wearable - Ultralight at just 17 grams - Up to 40 hr runtime

- Reliable and high quality LED Lamps and strips from leading manufacturer CREE - Total internal reflection (TIR) lenses draw LED light into efficient, well-controlled beams that maximize the usable lumens in the target area without glare - Precisely milled CNC 6061 Aluminum Housing for durability as well as fast heat dissipation - IPX6 waterproof rating - Different from traditional lithium battery bike lights, RECON-E lights are designed to plug into and work with most major - E-bike motor systems - Handle bar remote switch for on the fly control - Three mounting options - ANSI Certified

- Reliable and high quality LED Lamps and strips from leading manufacturer CREE - Total internal reflection (TIR) lenses draw LED light into efficient, well-controlled beams that maximize the usable lumens in the target area without glare - Precisely milled CNC 6061 Aluminum Housing for durability as well as fast heat dissipation - IPX6 waterproof rating - Different from traditional lithium battery bike lights, RECON-E lights are designed to plug into and work with most major - E-bike motor systems - Handle bar remote switch for on the fly control - Three mounting options - ANSI Certified

The Grid 2'fer is a high-powered front and rear light. A quick double-click of the power button switches it from white to red. With four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid 2'fer offers the right light, front or rear, with plenty of rechargeable power to keep you visible any time of day. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL - 1 STANDARD-This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Stay clean and stay seen with Topeak's DeFender iGlow. It's a unique rear fender that has an integrated 0.5W light for safety at night or during low-visibility conditions. Strap this impact-resistant plastic fender down quickly and easily to the junction of your bike's seat and top tubes, and adjust it for perfect coverage. With constant and blinking modes, this light is ready when you are.

Topeak's WhiteLite Race's two super-bright LEDs are just what you need to get home safely after the sun goes down. With its steady and blinking modes you're sure to catch the attention of drivers and its included coin batteries are good for up to 140 hours of use! Plus, the WhiteLite Race features a super-simple no-tools rubber strap handlebar mount that works on any bike. Just push the lens to toggle the light's modes!

Recon-E Light to Bosch motor unit connector cable.

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.

Features: - Up to 20 lumens ANSI standard approved - Runtime: Day mode 4 hrs., High 8 hrs., Middle 15 hrs., Flash 30 hrs. - Li-Po rechargeable battery - Low power indicator - Motion sensor include - IPX4 waterproof rating - Charge via Micro USB cable

A universal quick release mount that attaches to round-shaped drop and flat handlebars.

Keeping the light stable and centered on the handlebar, the stem mount allows for a clean, uncluttered handlebar.

BE SEEN The Recon HL100 and Recon TL100 are perfect everyday, multi-function lights for use on handlebars or helmets. Both offer abundant lumen output packed into a lightweight design. FEATURES: - Maximum output to 100 lumens - ANSI-Standard certified lumen output and run-time - Waterproof to IPX7 standard - Disperse optics with side light design for over 180 degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility SPECIFICATIONS: - Size: 31x31x32mm - Weight: 33g with mount - Max Output: 100 lumens - Runtime: High (100LM) 2.5hrs , Low (50LM) 4.5hrs, High Flash (100LM) 8hrs, Low Flash (5LM) 14hrs, Night Flash Mode (20LM) 6hrs - Battery: Li-Ion polymer battery (420mAh)

SMARTER VISION Aside from outstanding lumen capacity and industry-leading usage time, the Recon HL1100 monitors ambient light to change output accordingly, helping to save battery power for when you need it. Shine brighter, run longer and work smarter. FEATURES - Smart Mode light sensor monitors ambient light to adjust light output accordingly - ANSI certified lumens and run time - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum casing - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount SPECIFICATIONS - Size: 103x30x29 mm - Weight: 107g without mount - Colors: Black - Output: 1100 lumens - Runtime: High (1100LM) 1.5hrs, Middle 3.5hrs (500LM), Low 7hrs (275LM), Smart (100LM>275 LM with flash output in Day) 36hrs; (500LM with steady output at Night) 3.5hrs, Flash (100 LM) 33hrs - Battery: Li-Ion polymer battery (3500mAh) - Water resistance: IPX6 - Certifications: ANSI-Standard FL-1

The Recon+ HL series are powerful headlights with built-in blind spot warning indicators that work with a rearview radar device to alert for approaching vehicles.

Featuring dual-zone optical lenses, aluminum cooling fins and an external power pack, the Recon HL 1400 boasts the same technology as the Recon HL 3000 and HL 4500, our most powerful Recon head lights yet, projecting a super-bright wide-angle beam for up to 250 meters. The Recon TL150 tail light features Two steady beam modes, three flash beam modes and a Group Ride beam mode with different level lumen output for variable uses and run times. The Recon TL150 pairs to activate Group Ride beam mode that switches to a lower intensity to avoid blinding fellow riders on the group ride.

The Recon HL600 is the perfect multi-function light for use on handlebars or helmets. It features abundant light output in a lightweight design. - Lumens and runtime certified to the ANSI-Standard - Focused optics with side light design for over 270 degrees visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator can let you know how much run-time to go before powering off - Includes adjustable GoPro mount

A brilliant all-round combo, the Recon HL600/TL200 package gives riders ample lumen output and usage time for any casual riding scenario. Both fit easily on just about any Giant or Liv helmet and are GoPro mount compatible. Headlight: - Lumens and runtime certified to the ANSI-Standard - Focused optics with side light design for over 270 degrees visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator can let you know how much run-time to go before powering off - Includes adjustable GoPro mount Tailight: - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Disperse optics with side light design for over 180-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Compatible with saddle rail mount providing optimal angle for visibility

POWER COUPLE Perfect for the serious road or mountain biker to use under any conditions, the Recon HL 1100 combines outstanding lumen capacity with industry-leading usage time and monitors ambient light to change output accordingly while the powerful TL 200 ensures your visibility at all times. HL 1100: - Smart Mode light sensor monitors ambient light to adjust light output accordingly - ANSI certified lumens and run time - Focused optics with side light design for over 270-degrees of visibility - Heat-dissipating CNC-machined aluminum casing - Power status indicator alerts remaining run-time before powering off - Includes adjustable GoPro mount TL 200: - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility

Spare mount for the TL300 Radar tailight

An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.

ILLUMINATING THE FUTURE The Recon+ tail light can switch to a lower intensity light that avoids blinding fellow riders on the group ride. Features: - One super-powerful LEDs from world-famous manufacturer OSRAM - Two steady beam modes, three flash beam modes and - Group Ride beam mode with different level lumen output for variable use and run time - Pairs to activate Group Ride beam mode that switches to a lower intensity to avoid blinding fellow riders on the group ride - Compatible with ANT+ and Bluetooth devices - Easy-to-read LED power indicator on side displays the current power or recharge status (70~100% - Green; 30~70% - Orange; 0~30% - Red) - USB-C charging port - Rated IPX7 waterproof

ILLUMINATING THE FUTURE The Recon+ tail light can switch to a lower intensity light that avoids blinding fellow riders on the group ride. Features - Three super-powerful LEDs from world-famous manufacturer OSRAM - Two steady beam modes, three flash beam modes and - Group Ride beam mode with different level lumen output for variable use and run time - Pairs to activate Group Ride beam mode that switches to a lower intensity to avoid blinding fellow riders on the group ride - Compatible with ANT+ and Bluetooth devices - Easy-to-read LED power indicator on side displays the current power or recharge status (70~100% - Green; 30~70% - Orange; 0~30% - Red) - USB-C charging port

Recon-E Light to Shimano motor unit connector cable.